# dec/11/2025 20:33:17 by RouterOS 6.49.19
# software id = PTR7-9HFB
#
# model = RBD52G-5HacD2HnD
# serial number = 92F2096F1A59
/interface bridge
add admin-mac=B8:69:F4:26:03:DA auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether3 ] name=Eth3-PBX speed=100Mbps
set [ find default-name=ether1 ] disabled=yes name=ether1-WAN speed=100Mbps
set [ find default-name=ether2 ] name=ether2-Office speed=100Mbps
set [ find default-name=ether4 ] speed=100Mbps
set [ find default-name=ether5 ] speed=100Mbps
/interface pppoe-client
add add-default-route=yes interface=ether1-WAN name=pppoe-out1 password=\
    161171cap service-name=TPG-EFM use-peer-dns=yes user=\
    cap161171@pig.tpg.com.au
/interface wireless
set [ find default-name=wlan1 ] antenna-gain=0 band=2ghz-b/g/n channel-width=\
    20/40mhz-Ce country=australia disabled=no distance=indoors frequency=auto \
    frequency-mode=manual-txpower installation=indoor mode=ap-bridge name=\
    wlan1-2ghz ssid=Carpet-Court station-roaming=enabled wireless-protocol=\
    802.11
set [ find default-name=wlan2 ] antenna-gain=0 band=5ghz-a/n/ac \
    channel-width=20/40/80mhz-Ceee country=australia disabled=no distance=\
    indoors frequency=auto frequency-mode=manual-txpower installation=indoor \
    mode=ap-bridge name=wlan2-5ghz ssid=Carpet-Court-5G station-roaming=\
    enabled wireless-protocol=802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods="" \
    mode=dynamic-keys supplicant-identity=MikroTik wpa-pre-shared-key=\
    0732455488 wpa2-pre-shared-key=0732455488
/ip dhcp-server option
add code=66 name=PBX-66 value="'172.30.1.2'"
/ip pool
add name=default-dhcp ranges=172.30.1.100-172.30.1.250
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
/interface ovpn-client
add connect-to=203.63.251.218 mac-address=02:BE:1E:CF:3A:34 name=\
    ovpn-Capalaba password=Pss.974082 profile=default-encryption user=Abetta
/routing ospf area
add area-id=0.0.0.255 name=area10
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
    sword,web,sniff,sensitive,api,romon,dude,tikapp"
/interface bridge port
add bridge=bridge comment=defconf interface=ether2-Office
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1-2ghz
add bridge=bridge comment=defconf interface=wlan2-5ghz
add bridge=bridge disabled=yes interface=ovpn-Capalaba
add bridge=bridge disabled=yes interface=ether4
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1-WAN list=WAN
add interface=pppoe-out1 list=WAN
add list=WAN
add interface=ether4 list=WAN
/ip address
add address=172.30.1.1/24 comment=defconf interface=bridge network=172.30.1.0
add address=192.168.1.1/24 interface=Eth3-PBX network=192.168.1.0
add address=172.30.0.1/24 disabled=yes interface=bridge network=172.30.0.0
add address=192.168.20.254/24 disabled=yes interface=ether4 network=\
    192.168.20.0
add address=61.69.6.150/30 comment="NBN AAPT" interface=ether4 network=\
    61.69.6.148
/ip dhcp-client
add comment=defconf disabled=no interface=ether1-WAN
/ip dhcp-server lease
add address=172.30.1.6 client-id=1:0:17:c8:24:8c:84 comment=\
    "Kyocera Taskalpha 3051 ci" mac-address=00:17:C8:24:8C:84 server=defconf
/ip dhcp-server network
add address=172.30.1.0/24 comment=defconf dhcp-option=PBX-66 gateway=\
    172.30.1.1 netmask=24
/ip dns
set allow-remote-requests=yes servers=208.67.222.222,208.67.220.220
/ip dns static
add address=192.168.88.1 name=router.lan
/ip firewall address-list
add address=61.69.57.74 list=SIP
add address=13.237.137.170 comment="DUDE Server Amazon" list=SIP
add address=14.202.254.78 comment="Abetta EFM" list=SIP
add address=203.63.251.218 comment="Abetta NBN" list=SIP
add address=103.26.172.0/22 comment="Abetta NBN" list=SIP
/ip firewall filter
add action=drop chain=input dst-port=53 in-interface-list=WAN protocol=tcp
add action=drop chain=input dst-port=53 in-interface-list=WAN protocol=udp
add action=accept chain=input comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked
add action=accept chain=input dst-port=8291 in-interface-list=WAN protocol=\
    tcp src-address-list=SIP
add action=accept chain=input in-interface=ovpn-Capalaba
add action=accept chain=forward in-interface=ovpn-Capalaba
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
    invalid
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
    in-interface-list=!LAN
add action=accept chain=forward in-interface-list=WAN src-address-list=SIP
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
    ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
    ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
    connection-state=established,related
add action=accept chain=forward comment=\
    "defconf: accept established,related, untracked" connection-state=\
    established,related,untracked
add action=accept chain=forward in-interface-list=WAN src-address-list=SIP
add action=drop chain=forward comment="defconf: drop invalid" \
    connection-state=invalid in-interface-list=WAN log=yes log-prefix=\
    "DROP::   "
add action=drop chain=forward comment=\
    "defconf:  drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
    connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
    ipsec-policy=out,none out-interface-list=WAN
add action=masquerade chain=srcnat disabled=yes out-interface=ovpn-Capalaba
add action=dst-nat chain=dstnat dst-port=5060 in-interface-list=WAN protocol=\
    udp to-addresses=192.168.1.2
add action=dst-nat chain=dstnat dst-port=6000-6299 in-interface-list=WAN \
    protocol=udp to-addresses=192.168.1.2
add action=dst-nat chain=dstnat dst-port=2478-2479 in-interface-list=WAN \
    protocol=udp to-addresses=192.168.1.2
add action=dst-nat chain=dstnat dst-port=2478-2479 in-interface-list=WAN \
    protocol=tcp to-addresses=192.168.1.2
add action=dst-nat chain=dstnat dst-port=80 in-interface-list=WAN protocol=\
    tcp src-address-list=SIP to-addresses=192.168.1.2
/ip firewall service-port
set sip disabled=yes
/ip route
add distance=1 gateway=61.69.6.149
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/routing ospf network
add area=area10 network=10.10.10.0/24
add area=area10 network=172.30.1.0/24
add area=area10 network=192.168.1.0/24
/system clock
set time-zone-name=Australia/Brisbane
/system identity
set name=Capalaba
/system logging
set 1 action=disk
/system ntp client
set enabled=yes primary-ntp=67.219.100.202 secondary-ntp=202.142.132.8
/system ntp server
set enabled=yes
/system scheduler
add interval=1w name=autobackup on-event=":local saveUserDB false\r\
    \n:local saveSysBackup true\r\
    \n:local encryptSysBackup false\r\
    \n:local saveRawExport true\r\
    \n\r\
    \n:local FTPServer \"backup.posscales.com.au\"\r\
    \n:local FTPPort 21\r\
    \n:local FTPUser \"MT_Backups@backup.posscales.com.au\"\r\
    \n:local FTPPass \"!Dgt.974082\"\r\
    \n:local FTPdest \"/Abetta_Carpit_Court\"\r\
    \n\r\
    \n:local ts [/system clock get time]\r\
    \n:set ts ([:pick \$ts 0 2].[:pick \$ts 3 5].[:pick \$ts 6 8])\r\
    \n:local ds [/system clock get date]\r\
    \n:set ds ([:pick \$ds 7 11].[:pick \$ds 0 3].[:pick \$ds 4 6])\r\
    \n\r\
    \n:local fname (\"BACKUP-\".[/system identity get name].\"-\".\$ds.\"-\".\
    \$ts)\r\
    \n:local sfname (\"/\".\$fname)\r\
    \n:if (\$saveUserDB) do={\r\
    \n  /tool user-manager database save name=(\$sfname.\".umb\")\r\
    \n  :log info message=\"User Manager DB Backup Finished\"\r\
    \n}\r\
    \n:if (\$saveSysBackup) do={\r\
    \n  :if (\$encryptSysBackup = true) do={ /system backup save name=(\$sfnam\
    e.\".backup\") }\r\
    \n  :if (\$encryptSysBackup = false) do={ /system backup save dont-encrypt\
    =yes name=(\$sfname.\".backup\") }\r\
    \n  :log info message=\"System Backup Finished\"\r\
    \n}\r\
    \nif (\$saveRawExport) do={\r\
    \n  /export file=(\$sfname.\".rsc\")\r\
    \n  :log info message=\"Raw configuration script export Finished\"\r\
    \n}\r\
    \n:local backupFileName \"\"\r\
    \n:local backupDestPath \"\"\r\
    \n:foreach backupFile in=[/file find] do={\r\
    \n  :set backupFileName (\"/\".[/file get \$backupFile name])\r\
    \n  :set backupDestPath (\$FTPdest.\$backupFileName)\r\
    \n  :if ([:typeof [:find \$backupFileName \$sfname]] != \"nil\") do={\r\
    \n  # :log warning message=\"/tool fetch address=\$FTPServer port=\$FTPPor\
    t src-path=\$backupFileName user=\$FTPUser mode=ftp password=\$FTPPass dst\
    -path=\$backupDestPath upload=yes\"\r\
    \n\r\
    \n    /tool fetch address=\$FTPServer port=\$FTPPort src-path=\$backupFile\
    Name user=\$FTPUser mode=ftp password=\$FTPPass dst-path=\$backupDestPath \
    upload=yes\r\
    \n  }\r\
    \n}\r\
    \n:delay 5s\r\
    \n:foreach backupFile in=[/file find] do={\r\
    \n  :if ([:typeof [:find [/file get \$backupFile name] \"BACKUP-\"]]!=\"ni\
    l\") do={\r\
    \n    /file remove \$backupFile\r\
    \n  }\r\
    \n}\r\
    \n\r\
    \n:log info message=\"Successfully removed Temporary Backup Files\"\r\
    \n:log info message=\"Automatic Backup Completed Successfully\"" policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \
    start-date=aug/05/2021 start-time=20:33:17
/system script
add dont-require-permissions=no name="Manual Backup" owner=posscales policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":\
    local saveUserDB false\r\
    \n:local saveSysBackup true\r\
    \n:local encryptSysBackup false\r\
    \n:local saveRawExport true\r\
    \n\r\
    \n:local FTPServer \"backup.posscales.com.au\"\r\
    \n:local FTPPort 21\r\
    \n:local FTPUser \"MT_Backups@backup.posscales.com.au\"\r\
    \n:local FTPPass \"!Dgt.974082\"\r\
    \n:local FTPdest \"/Abetta_Carpit_Court\"\r\
    \n\r\
    \n:local ts [/system clock get time]\r\
    \n:set ts ([:pick \$ts 0 2].[:pick \$ts 3 5].[:pick \$ts 6 8])\r\
    \n:local ds [/system clock get date]\r\
    \n:set ds ([:pick \$ds 7 11].[:pick \$ds 0 3].[:pick \$ds 4 6])\r\
    \n\r\
    \n:local fname (\"BACKUP-\".[/system identity get name].\"-\".\$ds.\"-\".\
    \$ts)\r\
    \n:local sfname (\"/\".\$fname)\r\
    \n:if (\$saveUserDB) do={\r\
    \n  /tool user-manager database save name=(\$sfname.\".umb\")\r\
    \n  :log info message=\"User Manager DB Backup Finished\"\r\
    \n}\r\
    \n:if (\$saveSysBackup) do={\r\
    \n  :if (\$encryptSysBackup = true) do={ /system backup save name=(\$sfnam\
    e.\".backup\") }\r\
    \n  :if (\$encryptSysBackup = false) do={ /system backup save dont-encrypt\
    =yes name=(\$sfname.\".backup\") }\r\
    \n  :log info message=\"System Backup Finished\"\r\
    \n}\r\
    \nif (\$saveRawExport) do={\r\
    \n  /export file=(\$sfname.\".rsc\")\r\
    \n  :log info message=\"Raw configuration script export Finished\"\r\
    \n}\r\
    \n:local backupFileName \"\"\r\
    \n:local backupDestPath \"\"\r\
    \n:foreach backupFile in=[/file find] do={\r\
    \n  :set backupFileName (\"/\".[/file get \$backupFile name])\r\
    \n  :set backupDestPath (\$FTPdest.\$backupFileName)\r\
    \n  :if ([:typeof [:find \$backupFileName \$sfname]] != \"nil\") do={\r\
    \n   :log warning message=\"/tool fetch address=\$FTPServer port=\$FTPPort\
    \_src-path=\$backupFileName user=\$FTPUser mode=ftp password=\$FTPPass dst\
    -path=\$backupDestPath upload=yes\";\r\
    \n\r\
    \n   /tool fetch address=\$FTPServer port=\$FTPPort src-path=\$backupFileN\
    ame user=\$FTPUser mode=ftp password=\$FTPPass dst-path=\$backupDestPath u\
    pload=yes;\r\
    \n  }\r\
    \n}\r\
    \n:delay 5s\r\
    \n:foreach backupFile in=[/file find] do={\r\
    \n  :if ([:typeof [:find [/file get \$backupFile name] \"BACKUP-\"]]!=\"ni\
    l\") do={\r\
    \n    /file remove \$backupFile\r\
    \n  }\r\
    \n}\r\
    \n\r\
    \n:log info message=\"Successfully removed Temporary Backup Files\"\r\
    \n:log info message=\"Automatic Backup Completed Successfully\""
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
/tool netwatch
add down-script=":log error \" Interent DOWN\";" host=8.8.8.8 up-script=\
    ":log error \" Interent UP\";"